Martin Megson Posted May 10, 2016 Report Share Posted May 10, 2016 (edited) Is tool box growth a fact of boating and if so is it exponential. When I bought my boat over 4 years ago I made up a small tool box from my garage at home to deal with odd jobs. As I spent more time aboard I transferred more tools and had to buy a larger toolbox. Now, after 2 years as a live aboard I have transferred the entire tool box to the boat. At this rate I'll be looking for a butty by 2020. Edited May 10, 2016 by Martin Megson Link to comment Share on other sites More sharing options...
Ray T Posted May 10, 2016 Report Share Posted May 10, 2016 A man can never have enough tools! Link to comment Share on other sites More sharing options...
pearley Posted May 10, 2016 Report Share Posted May 10, 2016 Sort of other way round for me. Brought my 2 large tool boxes with us when we moved on board but they were for ever getting in the way. Didn't get rid of any tools but had to swop to a few smaller tool boxes that would store under the deck. Mind you, have bought some more tools over the years. Have a 24inch stillson I go to do the exhaust that is too big for any of the boxes so just has to sit on top. Link to comment Share on other sites More sharing options...
FadeToScarlet Posted May 11, 2016 Report Share Posted May 11, 2016 I now have.... 6 tool boxes. (Most frequently used tools; electrical tools and crimp connectors; Cutting tools; spanners; socket sets; angle grinder and bits with sandpaper) And large storage boxes containing power tools. And two drawers. And boxes of plumbing bits, screws, water pumps.......... I definitely need a butty Link to comment Share on other sites More sharing options...
dave moore Posted May 12, 2016 Report Share Posted May 12, 2016 I have a workshop full at home. Resolute's back cabin is packed underneath the floor with tools, paint and spares and the counter area is little different. They are seldom used, but it's comforting to know that in the event of a problem arising, the tools and resources to fix it are readily to hand. My fathers old imperial socket set and spanners have found a new lease of life with the Kelvin. Dave Link to comment Share on other sites More sharing options...
Guest Posted May 12, 2016 Report Share Posted May 12, 2016 Is tool box growth a fact of boating and if so is it exponential. When I bought my boat over 4 years ago I made up a small tool box from my garage at home to deal with odd jobs. As I spent more time aboard I transferred more tools and had to buy a larger toolbox. Now, after 2 years as a live aboard I have transferred the entire tool box to the boat. At this rate I'll be looking for a butty by 2020. Box.jpg Buying a particular tool for a particular job is a virtual guarantee that you will never ever have to actually use it. Not buying one almost certainly means you will at some point wish you had bought one. Link to comment Share on other sites More sharing options...
Phil Ambrose Posted May 12, 2016 Report Share Posted May 12, 2016 Buying a particular tool for a particular job is a virtual guarantee that you will never ever have to actually use it. Not buying one almost certainly means you will at some point wish you had bought one. Rather like insurance, you hope you never need to use it, bit if you don't have it...........Phil Link to comment Share on other sites More sharing options...
mark99 Posted May 20, 2016 Report Share Posted May 20, 2016 (edited) My most used tool seems to be that thing that gets stones out of horses hooves. Seriously seem always to be reaching for the brawdle and bent paperclip. Edited May 20, 2016 by mark99 Link to comment Share on other sites More sharing options...
stagedamager Posted May 20, 2016 Report Share Posted May 20, 2016 I now have.... 6 tool boxes. (Most frequently used tools; electrical tools and crimp connectors; Cutting tools; spanners; socket sets; angle grinder and bits with sandpaper) And large storage boxes containing power tools. And two drawers. And boxes of plumbing bits, screws, water pumps.......... I definitely need a butty Yep. And then you'll fill that too. I know this...... Link to comment Share on other sites More sharing options...
dave moore Posted May 20, 2016 Report Share Posted May 20, 2016 Recently I bought a cordless Bosch multi tool. Not cheap at £200 but a brilliant bit of kit, wish I'd done it long ago. From cutting through nails in garden fencing to removing bits of floorboard under a bath, it's superb. Dave Link to comment Share on other sites More sharing options...
FadeToScarlet Posted May 20, 2016 Report Share Posted May 20, 2016 Yep. And then you'll fill that too. I know this...... Your solution of two butties works You'll need a train of joeys to tow behind JA at this rate. Link to comment Share on other sites More sharing options...
Guest Posted May 20, 2016 Report Share Posted May 20, 2016 (edited) Not tool boxes as such, but I have just bought some magnetic trays/racks/screwdriver holders whch I plan to try in the engine hole. Will (hopefully) stick to the metal boat wherever I put them and make stuff more accessible. I get mightily peed off digging through boxes etc when I want that 17mm spanner/socket. I find I only need certain stuff for the average engine service, so the idea is to make these readily available (I have had such ideas before and they rarely work!) Time will tell and if they are not up to the job I can use them as fridge magnets Edited May 20, 2016 by Guest Link to comment Share on other sites More sharing options...
DHutch Posted May 20, 2016 Report Share Posted May 20, 2016 Our back cabin is basically a toolbox for the boat. We have a set of shallow drawers on industrial ball bearing rollers, and two large draws beside, as well as a long thin toolbox built around the above-floor propshaft. Full set of Metric, AF and Whitworth spanners and sockets, to name but two of the drawers. Taps, dies, feelers, shim set, micrometer, t-bars. Daniel Link to comment Share on other sites More sharing options...
koukouvagia Posted May 20, 2016 Report Share Posted May 20, 2016 Not tool boxes as such, but I have just bought some magnetic trays/racks/screwdriver holders whch I plan to try in the engine hole. Will (hopefully) stick to the metal boat wherever I put them and make stuff more accessible. I get mightily peed off digging through boxes etc when I want that 17mm spanner/socket. I find I only need certain stuff for the average engine service, so the idea is to make these readily available (I have had such ideas before and they rarely work!) Time will tell and if they are not up to the job I can use them as fridge magnets Yes. This method works well. As you say, a good idea for tools you need all the time. Link to comment Share on other sites More sharing options...
Guest Posted May 20, 2016 Report Share Posted May 20, 2016 Yes. This method works well. As you say, a good idea for tools you need all the time. I am extremely envious Link to comment Share on other sites More sharing options...
DHutch Posted May 20, 2016 Report Share Posted May 20, 2016 Yes. This method works well. As you say, a good idea for tools you need all the time. I too like that! Link to comment Share on other sites More sharing options...
bag 'o' bones Posted May 20, 2016 Report Share Posted May 20, 2016 Is tool box growth a fact of boating and if so is it exponential. When I bought my boat over 4 years ago I made up a small tool box from my garage at home to deal with odd jobs. As I spent more time aboard I transferred more tools and had to buy a larger toolbox. Now, after 2 years as a live aboard I have transferred the entire tool box to the boat. At this rate I'll be looking for a butty by 2020. Box.jpg I want one! Looks slightly narrower than a 'snap on' type. Where did you buy it from? Link to comment Share on other sites More sharing options...
Lady Muck Posted May 20, 2016 Report Share Posted May 20, 2016 (edited) when we moved onboard ten years ago, most of the space under our bed was devoted to my clothes and shoes, now its mostly tools. Two new power tools and a wetvac this month and I've actually had to ebay more shoes to make room for them. If this trend continues I shall have to wear angle grinder discs instead of a bra. Yes they may chafe rather. Edited May 20, 2016 by Lady Muck Link to comment Share on other sites More sharing options...
FadeToScarlet Posted May 20, 2016 Report Share Posted May 20, 2016 when we moved onboard ten years ago, most of the space under our bed was devoted to my clothes and shoes, now its mostly tools. Two new power tools and a wetvac this month and I've actually had to ebay more shoes to make room for them. If this trend continues I shall have to wear angle grinder discs instead of a bra. Yes they may chafe rather. A couple of wire cup brushes would recreate the Madonna look. Yes. This method works well. As you say, a good idea for tools you need all the time. Are those metric or imperial adjustable spanners? Link to comment Share on other sites More sharing options...
AndrewIC Posted May 20, 2016 Report Share Posted May 20, 2016 Buying a particular tool for a particular job is a virtual guarantee that you will never ever have to actually use it. Not buying one almost certainly means you will at some point wish you had bought one. Buying a replacement for a tool you are sure is irretrievably lost is a sure fire way to find the original... Link to comment Share on other sites More sharing options...
Taslim Posted May 23, 2016 Report Share Posted May 23, 2016 (edited) Buying a replacement for a tool you are sure is irretrievably lost is a sure fire way to find the original... Oh how true! Anyone need an 1 5/8', left handed.............Never used. Ed 'cause of fat fingers. Edited May 23, 2016 by Taslim Link to comment Share on other sites More sharing options...
Bettie Boo Posted May 23, 2016 Report Share Posted May 23, 2016 Buying a replacement for a tool you are sure is irretrievably lost is a sure fire way to find the original... Oh soooo true...like the tool for unscrewing the pump out cover. We have the nice brass one I'm in charge of and the other two that Dave swears are "somewhere" on the boat What I don't understand is how he manages to "loose or mislay" so much in such a confined space Link to comment Share on other sites More sharing options...
mayalld Posted May 24, 2016 Report Share Posted May 24, 2016 Yes. This method works well. As you say, a good idea for tools you need all the time. Sheer pornography! Link to comment Share on other sites More sharing options...
Featured Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now