Filler for screw heads

[Tonka]

When a door card is screwed to the metel door with csk screws which are screwed from outside. What is the best filler to fill the screwheads. I was thinking of epoxy or plastic padding but I am open to suggestions

[Ark Right]

A suggestion for you

 

Don't screw them from the outside, end of problem

 

A

[Neil Smith]

Stick em on with gripper or no nails.

 

Neil

[Timleech]

What's a 'door card'?

 

 

Tim

[Bobbybass]

I use epoxy filler for nearly all my filling jobs these days.

 

I use it on household 'cracks' all the time...as it sets quickly...you can sand and refill...and its flexible so it resists cracking etc.

Also...if you used a 'water based' filler...you would risk the screw heads corroding and 'blowing' the filler at some point.

 

Bob