STIG Posted April 17, 2014 Report Share Posted April 17, 2014 I was sat reading my engine manual the other day , in particular, gearbox oil. Manual states for it to be changed every 500 hours, as we are in that area I took a look as you do but could not see any sign of a dipstick, as is referenced in the manual. Is this normal and if so what is the procedure Link to comment Share on other sites More sharing options...
Schipper Posted April 17, 2014 Report Share Posted April 17, 2014 If it is a Technodrive gearbox,there should be a dipstick Geert Link to comment Share on other sites More sharing options...
russ2903 Posted April 17, 2014 Report Share Posted April 17, 2014 If you stand/sit with your back to the tiller, directly over the gearbox look down. On the top of the gearbox towards the left corner you should see your dipstick. You should see a round bar like tube that terminates about 3 inches above the top of the gearbox with a round part to put your finger in. A good pull will release the dipstick and you will find 2 marks, H & L. The correct oil is A.T.F. Link to comment Share on other sites More sharing options...
Iain_S Posted April 17, 2014 Report Share Posted April 17, 2014 If it's a PRM or Hurth, the dipstick should be attached to the "bolt" you remove to fill the gearbox. Iain Link to comment Share on other sites More sharing options...
Featured Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now