buggsy Posted September 6, 2011 Report Share Posted September 6, 2011 I have had problems with my Shurflo Aquaking water pump losing pressure. So as usual I consulted the forum search engine and tried several options and also replaced the pump with the previous pump, which was replaced due to leaking but still no improvement. After replacing the filter and realising that the incoming flow was very low I investigated further by draining the integral tank and removing the valve and fittings. I found the fittings and valve to be completely blocked with rusty particles almost blocking the flow. These have now been thoroughly cleaned and all is back to normal. So the moral of the story is to always look at the simple things first. cheers Steve I must get around to reblacking the water tank!! Link to comment Share on other sites More sharing options...
Smelly Posted September 6, 2011 Report Share Posted September 6, 2011 However Occam's razor has left you with a spare pump for when the new one dies. Silver linings! Link to comment Share on other sites More sharing options...
Featured Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now