WotEver Posted November 14, 2018 Report Share Posted November 14, 2018 38 minutes ago, aracer said: Any thoughts on what to use to seal around the edges would be welcome. You should be able to find something here: https://sealsdirect.co.uk/Index.asp Link to comment Share on other sites More sharing options...
frahkn Posted November 15, 2018 Report Share Posted November 15, 2018 Wasn't there a member here - Roger something? - who posted a long piece about secondary glazing which he used in the winter. It might have been a while ago. Link to comment Share on other sites More sharing options...
doratheexplorer Posted November 15, 2018 Report Share Posted November 15, 2018 6 hours ago, frahkn said: Wasn't there a member here - Roger something? - who posted a long piece about secondary glazing which he used in the winter. It might have been a while ago. Yes. On this very thread in fact Link to comment Share on other sites More sharing options...
WotEver Posted November 15, 2018 Report Share Posted November 15, 2018 2 hours ago, doratheexplorer said: Yes. On this very thread in fact Tee hee... Link to comment Share on other sites More sharing options...
frahkn Posted November 15, 2018 Report Share Posted November 15, 2018 Teach me to read the whole thread (even if it is 9 years old) before posting. Link to comment Share on other sites More sharing options...
system 4-50 Posted March 8, 2020 Report Share Posted March 8, 2020 I have decided to get acrylic secondary double glazing for 4 of my ChannelGlaze windows but I can't find anyone who will cut them to size AND radius the bottom corners to R=74mm. This is despite having bought 1 before, albeit 10 years ago. I have found ones that will radius up to R=20mm but that is no good. Can anyone point me at a website that will do it? Link to comment Share on other sites More sharing options...
WotEver Posted March 8, 2020 Report Share Posted March 8, 2020 41 minutes ago, system 4-50 said: I have decided to get acrylic secondary double glazing for 4 of my ChannelGlaze windows but I can't find anyone who will cut them to size AND radius the bottom corners to R=74mm. This is despite having bought 1 before, albeit 10 years ago. I have found ones that will radius up to R=20mm but that is no good. Can anyone point me at a website that will do it? If you have a jigsaw and a fine file it’s pretty easy to do yourself. Link to comment Share on other sites More sharing options...
system 4-50 Posted March 8, 2020 Report Share Posted March 8, 2020 8 minutes ago, WotEver said: If you have a jigsaw and a fine file it’s pretty easy to do yourself. There are nearly 150 things on my to do list without that. And I wouldn't get a nice finish. Link to comment Share on other sites More sharing options...
WotEver Posted March 8, 2020 Report Share Posted March 8, 2020 1 hour ago, system 4-50 said: There are nearly 150 things on my to do list without that. And I wouldn't get a nice finish. I’ll see if I can find you a nice round tuit. Link to comment Share on other sites More sharing options...
cuthound Posted March 8, 2020 Report Share Posted March 8, 2020 2 hours ago, WotEver said: I’ll see if I can find you a nice round tuit. Here's one. ? Link to comment Share on other sites More sharing options...
captain flint Posted March 8, 2020 Report Share Posted March 8, 2020 On 14/11/2018 at 21:25, aracer said: (my curtains run between that and a metal rod and making that gap smaller wouldn't be good You've probably worked out how you want to do it by now, but just thought I'd mention I fitted the magnetic tape secondary acrylic glazing having read this link. My windows have the same arrangement as yours, at least in the bedroom. It has not caused any problems. it's only a few mm, and the curtains work fine, open and shut.... Only very minor thing is if I want to pop the window a crack and slide the secondary glazing down to leave a crack there, too, as I often do, then every now and then, if you're not careful, the wire holding the curtains can push on the now bottomwards protruding acrylic, and it can slide off. But once you get wise to it it's not hard to avoid. I'd not say curtains such as you and I have and acrylic secondary glazing mag taped to the inside of window frame are incompatible, but of course I haven't seen your actual windows/curtains, so I suppose maybe in your case it would be an issue...But I'd be a bit surprised Link to comment Share on other sites More sharing options...
Mad Harold Posted March 8, 2020 Report Share Posted March 8, 2020 8 hours ago, system 4-50 said: I have decided to get acrylic secondary double glazing for 4 of my ChannelGlaze windows but I can't find anyone who will cut them to size AND radius the bottom corners to R=74mm. This is despite having bought 1 before, albeit 10 years ago. I have found ones that will radius up to R=20mm but that is no good. Can anyone point me at a website that will do it? It is very easy.I did secondary perspex glazing,cutting it with an angle grinder and rounding off with a file.(Don't use a saw) I stuck the inner panes to the window frames with double sided tape. If you can't find anyone to cut them for you,then you have no option but to do it yourself. I believe that magnetic tape would be better for sticking the secondary glazing in that it would be easier to remove the inner pane to open a window.In my case the windows don't open,but there is an opening skylight. Link to comment Share on other sites More sharing options...
Featured Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now