Jelle Posted March 12, 2008 Report Share Posted March 12, 2008 Heya, I'm relatively new to these waters, I have bought and am fitting out a GRP cruiser and was wondering what method of fixing battens to the GRP head lining you guys might recomend? It's no more than 5mm thick so I was thinking either a two part resin or a solvent based adhesive as opposed to screws. Any advice greatly appreciated! Thanks, Jelle Link to comment Share on other sites More sharing options...
Phoenix_V Posted March 12, 2008 Report Share Posted March 12, 2008 Polyurethane glue from screwfix, did one about 6 years ago, no problems, dont get it on your hands though nothing gets it off Link to comment Share on other sites More sharing options...
steelaway Posted March 12, 2008 Report Share Posted March 12, 2008 Heya, I'm relatively new to these waters, I have bought and am fitting out a GRP cruiser and was wondering what method of fixing battens to the GRP head lining you guys might recomend? It's no more than 5mm thick so I was thinking either a two part resin or a solvent based adhesive as opposed to screws. Any advice greatly appreciated! Thanks, Jelle Evode product - 'Sticks Like S--T' not cheap (£8.00) but it does what it says on the tube. Alex Link to comment Share on other sites More sharing options...
blackrose Posted March 12, 2008 Report Share Posted March 12, 2008 Marineflex http://www.marinemastics.com/marine-flex.html http://www.tradboats.com/conseamfillers.html My chandler sells it for about £6.50 for a 330ml tube. Link to comment Share on other sites More sharing options...
Featured Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now