Gas safe engineer and custom stove pipe

[Adam1991]

Hi, we’re struggling to find anyone to install our gas oven and hob in a sail away build. The oven and hob are installed but not connected. 
 

Does anyone have any marine gas engineers they could recommend? It would be a straight run out to the cylinder and all connecting up required. 
 

Also, does anyone know a welder who could make up a simple single skin welded stove pipe with a 45degree bend halfway?

 

The boat is in the midlands so midlands based recommendations would be great 😊 

 

Adam 

Edited April 29, 2023 by Adam Mc Gowan

[Chewbacka]

Why make a welded stove pipe when you can buy the bits and slot them together?

[Adam1991]

Hi chewbacka, we need it to be at an angle and cont find a pre made pipe which has an angle halfway up. A straight pipe is too close to combustibles. 

[David Mack]

Any local jobbing welder should be able to make up a single skin steel flue pipe of whatever shape you require. But he will need a template of the shape needed - a matter of discussion whether you or he make the template, and who takes responsibility if the flue doesn't fit!