Fitting parts for Whale Gulper - Plumbing

[Aiste]

Hello all, I wonder if someone could help.. 

 

We have recently bought a new Whale Gulper IC with manufold all 19mm diameter and now are struggling to find parts for it to fit it! The area where the pump will fit is quite small so we thought of using Y connectors and elows. Our issue is that we can't find 19mm push fit elows anywhere! 

 

Questions

- Has anyone fit in 19mm Gulper before with manufold if so what was your set up? 

- Does anyone know where to find push fit elbow 19mm?

- Does anyone know where to find two way connector size 19mm?

 

Here is the gulper:

https://www.whalepumps.com/marine/product.aspx?Category_ID=&Product_ID=10040&FriendlyID=Grey-IC

 

 

 

[matty40s]

https://www.screwfix.com/p/hep2o-plastic-push-fit-equal-90-elbows-15mm-10-pack/4395f

[Stilllearning]

Do you need 15 or 19mm fittings?

[Tracy D'arth]

Its not made for push fit fittings!  The instructions say 19mm  , 3/4"   or 25mm,  1"   smooth internal flexible hose and worm drive hose clamps.  See section 12 of the instructions.

[roland elsdon]

It will fail 1 day out of warranty. The ic stuff from whale is hopeless. That’s why it’s hose and clamp. The last ic product I bought which ran the bilge pump failed the day before we flew to Oz for 9 months. It replacement failed 2 years later, at the check before we left for the same  duration working trip. It means you just drive to midland chandlers bang in another one and fly out rather than replace it with something reliable.

[system 4-50]

1 hour ago, Tracy D'arth said:

Its not made for push fit fittings!  The instructions say 19mm  , 3/4"   or 25mm,  1"   smooth internal flexible hose and worm drive hose clamps.  See section 12 of the instructions.

what the man said.