Jporter Posted July 17, 2021 Report Share Posted July 17, 2021 Is there a tool that can be used to estimate the time to travel from one point to another on the canal / river network? Link to comment Share on other sites More sharing options...
Tony Brooks Posted July 17, 2021 Report Share Posted July 17, 2021 Between 3 and 4 lock miles per hour, but Canalplan AC will do it for you and you can alter the assumptions. Link to comment Share on other sites More sharing options...
BEngo Posted July 17, 2021 Report Share Posted July 17, 2021 7 minutes ago, Jporter said: Is there a tool that can be used to estimate the time to travel from one point to another on the canal / river network? Canal plan ac is a very good journey planner. Google will find it. You can use its defaults, which are not far out for us, or adjust your speed etc to allow for things like having a mega crew. N Link to comment Share on other sites More sharing options...
Ray T Posted July 17, 2021 Report Share Posted July 17, 2021 This? Canal Route Planner – CanalPlanAC Link to comment Share on other sites More sharing options...
Jporter Posted July 17, 2021 Author Report Share Posted July 17, 2021 Excellent tool! Link to comment Share on other sites More sharing options...
DerekB Posted November 4, 2021 Report Share Posted November 4, 2021 On 17/07/2021 at 19:10, Tony Brooks said: Between 3 and 4 lock miles per hour, but Canalplan AC will do it for you and you can alter the assumptions. Does it allow for factors such as beam, draft / air draft? Link to comment Share on other sites More sharing options...
Tracy D'arth Posted November 4, 2021 Report Share Posted November 4, 2021 6 minutes ago, DerekB said: Does it allow for factors such as beam, draft / air draft? No. You have to know your boat limits and the canal. Link to comment Share on other sites More sharing options...
DerekB Posted November 4, 2021 Report Share Posted November 4, 2021 6 minutes ago, Tracy D'arth said: No. You have to know your boat limits and the canal. Thats a shame....I did find one site where you could select the canal and it told you the minimum depth, width and heights on the canal. Didn't play around with it much yet though. Combining that with a "route planner" would be handy. I'm currently boat shopping for first boat so very much reading everything i can find on this stuff 🙂 Link to comment Share on other sites More sharing options...
gbclive Posted November 4, 2021 Report Share Posted November 4, 2021 (edited) 18 minutes ago, Tracy D'arth said: No. You have to know your boat limits and the canal. Actually, under the planning tab you can set the following using imperial or metric: Boat length (feet😞 Boat width (feet😞 Boat height (feet😞 Boat draught (feet😞 (Ignore the strange smileys, nowt to do with me, they just appeared when I copied the above from the web page, and editing them out does not work on my iPad). Edited November 4, 2021 by gbclive 1 Link to comment Share on other sites More sharing options...
DerekB Posted November 4, 2021 Report Share Posted November 4, 2021 1 minute ago, gbclive said: Actually, under the planning tab you can set the following using imperial or metric: Boat length (feet😞 Boat width (feet😞 Boat height (feet😞 Boat draught (feet😞 (Ignore the strange bug thing😏) Thats great then, I did a quick route plan on the canalplan AC site when looking at a boat out near Bath....as i need it to be in london....but obviously didn't look hard enough for settings like that. Cheers for that. Link to comment Share on other sites More sharing options...
Tracy D'arth Posted November 4, 2021 Report Share Posted November 4, 2021 5 minutes ago, gbclive said: Actually, under the planning tab you can set the following using imperial or metric: Boat length (feet😞 Boat width (feet😞 Boat height (feet😞 Boat draught (feet😞 (Ignore the strange bug thing😏) Never done that! I missed that option. Does it work? Link to comment Share on other sites More sharing options...
Alan de Enfield Posted November 4, 2021 Report Share Posted November 4, 2021 11 minutes ago, Tracy D'arth said: Never done that! I missed that option. Does it work? Yes - it will come up and say 'route not possible' if your settings do not fit the canal (assuming the canal dimensions are both listed and correct - and we know air-draft is regularly not known) You can also set tidal waters yes / no and all sorts of other things. Link to comment Share on other sites More sharing options...
David Mack Posted November 4, 2021 Report Share Posted November 4, 2021 (edited) 2 hours ago, Tracy D'arth said: Never done that! I missed that option. Does it work? Yes, but not faultlessly, as it is reliant on the data sources used for the program. For example it told me that I couldn't take a 70 ft boat from the Rochdale Canal to Salterhebble, despite the fact I had already done it in two different full length narrow boats. Turned out that as this section is part of the Calder and Hebble the maximum boat length was set to 57 ft, even though there are no locks on this section. I think that particular glitch has been fixed, but there may be others. Edited November 4, 2021 by David Mack Link to comment Share on other sites More sharing options...
StephenA Posted November 4, 2021 Report Share Posted November 4, 2021 14 minutes ago, David Mack said: Yes, but not faultlessly, as it is reliant on the data sources used for the program. For example it told me that I couldn't take a 70 ft boat from the Rochdale Canal to Salterhebble, despite the fact I had already done it in two different full length narrow boats. Turned out that as this section is part of the Calder and Hebble the maximum boat length was set to 57 ft, even though there are no locks on this section. I think that particular glitch has been fixed, but there may be others. There is still a lot of information missing. https://canalplan.org.uk/cgi-bin/showstuff.cgi?mode=helpus Shows just how patchy the data is.... Link to comment Share on other sites More sharing options...
Tracy D'arth Posted November 4, 2021 Report Share Posted November 4, 2021 19 minutes ago, David Mack said: Yes, but not faultlessly, as it is reliant on the data sources used for the program. For example it told me that I couldn't take a 70 ft boat from the Rochdale Canal to Salterhebble, despite the fact I had already done it in two different full length narrow boats. Turned out that as this section is part of the Calder and Hebble the maximum boat length was set to 57 ft, even though there are no locks on this section. I think that particular glitch has been fixed, but there may be others. That is why I asked if it works. Does it allow wide beams on the North Oxford for example? Link to comment Share on other sites More sharing options...
StephenA Posted November 4, 2021 Report Share Posted November 4, 2021 (edited) 10 minutes ago, Tracy D'arth said: That is why I asked if it works. Does it allow wide beams on the North Oxford for example? But of course if you don't tell Canalplan you are 14 feet wide.... Edited November 4, 2021 by StephenA 1 Link to comment Share on other sites More sharing options...
ditchcrawler Posted November 4, 2021 Report Share Posted November 4, 2021 1 hour ago, StephenA said: But of course if you don't tell Canalplan you are 14 feet wide.... Bit like HGVs using standard "satnav" 1 Link to comment Share on other sites More sharing options...
Featured Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now