Jump to content

Kitchen cabinet doors


Featured Posts

I've seen lots of boats with very smart looking kitchen paneled cupboard doors.

Where do folks get them?

I've started looking at Howdens, Ikea  but found nothing so far.

What am I doing wrong, where do I look?

Mebe needs to be a national supplier as I'm Darn Sarf.

I guess the size would be around 34 x 48 cm and I'm looking for six in all.

 

Suggestions welcomed

 

Link to comment
Share on other sites

There are lots of companies who specialise in supplying replacement doors for existing cabinets.  Try googling replacement kitchen doors.  I had some made to order a few years ago for the house.   They were wrapped MDF but you ought to find something in wood.

Link to comment
Share on other sites

Getting wooden doors is like finding rocking horse dropping these days everything seems to be MDF (compost if allowed to get damp) and a wrapping over them, some do look like wood but aren't I got some a few years back that were real wood but this last year I have been looking for our new kitchen and can only find bespoke expensive wooden/ ply doors 

Link to comment
Share on other sites

1 hour ago, philjw said:

There are lots of companies who specialise in supplying replacement doors for existing cabinets.  Try googling replacement kitchen doors.  I had some made to order a few years ago for the house.   They were wrapped MDF but you ought to find something in wood.

Thanks to all thus far. My experience to date (since penning the request) pretty well mirrors all your comments! 

It seems there's a highly organised set of companies with advanced machinery that turn sawdust into convincing looking doors - that is until they get wet. To pay what to my mind equates to the cost of what was hitherto made out of real wood, but now is wood waste rankles somewhat...

 

FWIW many years ago I did an IT consultancy job for a 'glue factory' in Slough and was amazed at what could be done using the appropriate chenicals to stick one improbable substrate to another. Now I understand xx years later. As it happens all the specialised stuff was made in Braunston (which amused me when we started canal boating).

 

The next owner of the boat will have to make do with some gaping holes...

Link to comment
Share on other sites

I know a couple of people who have worked for really posh kitchen makers, producing kitchens up to £100,000. I was amazed to find that even at this end of the market faced mdf is the norm.

Both have now left and got jobs working with proper wood.

 

..................Dave

Link to comment
Share on other sites

2 hours ago, philjw said:

There are lots of companies who specialise in supplying replacement doors for existing cabinets.  Try googling replacement kitchen doors.  I had some made to order a few years ago for the house.   They were wrapped MDF but you ought to find something in wood.

My wrapped MDF doors lasted about 16 years and then they started to unwrap on just a few of the edges, the MDF didn't  surprisingly fall apart. Replaced them with new ones from B&Q

Link to comment
Share on other sites

57 minutes ago, OldGoat said:

Thanks to all thus far. My experience to date (since penning the request) pretty well mirrors all your comments! 

It seems there's a highly organised set of companies with advanced machinery that turn sawdust into convincing looking doors - that is until they get wet.  

Why should they get wetter on a narrowboat than in a house

  • Greenie 1
Link to comment
Share on other sites

2 hours ago, blackrose said:

You say you tried ikea. Don't they supply solid wood kitchen cabinet doors anymore?

 

My kitchen was from Ikea and the doors are all solid oak. Mind you, I fitted it 16 years ago so things may have gone downhill there.

Unfortunately no MDF reigns my previous kitchen was IKEA and real wood.

Link to comment
Share on other sites

2 hours ago, PeterF said:

Boat builder on my new boat used DIY Kitchens, real wood doors. https://www.diy-kitchens.com

Out of interest where did you find the bit where it said solid wood.   I can find no mention of solid wood and the video just shows chipboard being worked.  I will be looking for doors in the not too distant future hence the interest.

Edited by Jerra
Link to comment
Share on other sites

Most of the suppliers I have looked in the past who claim to provide 'real wood' doors actually use real wood frames with a veneered mdf panel.

There used to be a pine furniture shop near us where the chap made all the furniture himself, and used 9mm thick pine for the door panels. He told me he bought in the panel board (made from strips of pine glued together) from a supplier on the south coast - pine board that thin doesn't seem to be available from most local timber merchants.

Link to comment
Share on other sites

5 minutes ago, Jerra said:

Out of interest where did you find the bit where it said solid wood.   I can find no mention of solid wood and the video just shows chipboard being worked.  I will be looking for doors in the not too distant future hence the interest.

The cabinets they make may well be chipboard, but the shaker doors we had are solid wood, not sure if all are solid and you can order doors only as long as they are standard sizes.

 

See Linwood Oak

Link to comment
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
  • Recently Browsing   0 members

    • No registered users viewing this page.
×
×
  • Create New...

Important Information

We have placed cookies on your device to help make this website better. You can adjust your cookie settings, otherwise we'll assume you're okay to continue.