CLAN1 Posted February 26, 2021 Report Share Posted February 26, 2021 Hi looking to remove t&g & replace with ply panels, any suggestions on what thickness. Cheers Link to comment Share on other sites More sharing options...
Tracy D'arth Posted February 26, 2021 Report Share Posted February 26, 2021 Why remove the T&G? Just glue 4mm veneered ply over the top with polyurethane 5 minute wood glue. More insulation = less condensation. 1 Link to comment Share on other sites More sharing options...
BEngo Posted February 26, 2021 Report Share Posted February 26, 2021 Do you need to fasten anything to the panels? If very heavy ( big fire extinguisher say) then 18mm Fairly heavy, 12mm Lights, pictures etc 9mm Nothing at all 6mm. Tracy's suggestion is good, if you can cut the ply accurately. N Link to comment Share on other sites More sharing options...
CLAN1 Posted February 26, 2021 Author Report Share Posted February 26, 2021 Hi had thought about going over the top however having asked that question on here last year a lot of replies was against it, think now i will go back to original idea, will fix thin beading on the t&g to take up the uneven then 6mm ply many thanks for the replies.? Link to comment Share on other sites More sharing options...
Featured Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now