New wood panels

[CLAN1]

Hi looking to remove t&g & replace with ply panels, any suggestions on what thickness. Cheers

[Tracy D'arth]

Why remove the T&G? Just glue 4mm veneered ply over the top with polyurethane 5 minute wood glue. More insulation = less condensation.

[BEngo]

Do  you need to fasten anything to the panels?

 

If very heavy ( big fire extinguisher say)  then 18mm

Fairly heavy,  12mm

Lights, pictures etc 9mm

Nothing at all 6mm.

 

Tracy's suggestion is good, if you can cut the ply accurately.

N

[CLAN1]

Hi had thought about going over the top however having asked that question on here last year a lot of replies was against it, think now i will go back to original idea,   will fix thin beading on the t&g to take up the uneven then 6mm ply many thanks for the replies.?