frygood Posted July 7, 2020 Report Share Posted July 7, 2020 Hi I have flexible solar panels bolted to my roof.I know not the best idea but that's what i have.As sure as mustard my paintwork under them has cracked and blistered and flaked off. Now how to solve this problem.I think the heat generated by the black panels has cracked the paint them moisture has caused the dreaded rust. So i think mask off the panels remove the panels and remove the paint underneath.Feratan primer then a good paint like epiphanes multiforte.Or what do you guys think about wax oil or car under shield under the panels when refitted.Also just raise the panels by using a tap washer or simular.So moister can run out and have a small air gap.Obviously we won't stand on them. Am i on the right track or do some of you knowledgeable guys have a better idea.Im going to stick with the panels i have. Link to comment Share on other sites More sharing options...
matty40s Posted July 7, 2020 Report Share Posted July 7, 2020 The panels will probably fail soon anyway, having been removed, so why not get some proper panels. The paint will fail again if you put them back on. 1 Link to comment Share on other sites More sharing options...
Featured Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now