Jump to content

Attaching rope fenders


Galilee
 Share

Featured Posts

I've bought some big old rope fenders for the bow and stern of our new boat and they've just arrived from Midland Chandlers. Each fender has a number of chains attached, but none of the chains have an opening link on the end. What could I use that would be strong enough to attach the chains to the eyelets in the hull?

 

Thanks, Stuart.

Link to comment
Share on other sites

4 minutes ago, Galilee said:

I've bought some big old rope fenders for the bow and stern of our new boat and they've just arrived from Midland Chandlers. Each fender has a number of chains attached, but none of the chains have an opening link on the end. What could I use that would be strong enough to attach the chains to the eyelets in the hull?

 

Thanks, Stuart.

Ideally you need to cut thru one side of the chains so that they become a weak link.

If you then get the front 'button' caught in the lock-gate then the chain will snap open and the fender fall away, rather than sinking the boat.

 

 

 

Shackles available from any Chandlery or ebay.

 

 

 

s-l1600.jpg

 

 

 

 

 

 

Edited by Alan de Enfield
  • Greenie 1
Link to comment
Share on other sites

9 minutes ago, jonesthenuke said:

Rope shackles are surprisingly strong, do not rely on them as a weak link.

We used to use 6mm rope as a weak link when launching Gliders. The rope was tested / calibrated and gave a breaking strain of 1000lbs, far to strong for a weak link on your button.

 

I wouldn't recommend those 8mm 'soft-shackles' that are linked to, they have a quoted breaking strain of 1.4 tonnes

Edited by Alan de Enfield
Link to comment
Share on other sites

24 minutes ago, Alan de Enfield said:

We used to use 6mm rope as a weak link when launching Gliders. The rope was tested / calibrated and gave a breaking strain of 1000lbs, far to strong for a weak link on your button.

 

I wouldn't recommend those 8mm 'soft-shackles' that are linked to, they have a quoted breaking strain of 1.4 tonnes

I use those soft shackles to attach my centre line and they have taken quite a lot of abuse stopping the boat and not had any break.

 

Link to comment
Share on other sites

16 hours ago, Steve42 said:

Very good point the weak link, often omitted. When I was attaching the fenders to my first boat Bob Allen (Les Allen boats) told me off for chaining the two buttons on, said I should use rope 1/4" ish.

Adding a weak link's a good idea though.

 

Both my bow and stern fenders are on cord not chain. But I do need to change the bright blue for something nicer

Link to comment
Share on other sites

Mine are on with the things @MartinC mentions above - felt very proud of self for finding suitable option in very urban shopping centre!

 

Once boat is painted this summer I do see the point of the rope ones (for non-metal:metal, I'd keep my stretchable ones too)... Daft Q: (how) do you open them to get them through loop on boat/in chain @Ray T? They look rather smart.

Link to comment
Share on other sites

2 minutes ago, TheMenagerieAfloat said:

Mine are on with the things @MartinC mentions above - felt very proud of self for finding suitable option in very urban shopping centre!

 

Once boat is painted this summer I do see the point of the rope ones (for non-metal:metal, I'd keep my stretchable ones too)... Daft Q: (how) do you open them to get them through loop on boat/in chain @Ray T? They look rather smart.

 

It's to be hoped you never get caught up in a gate-protuberance when going up in a lock.

 

So many examples and near sinkings (if the crew hadn't been awake and seen the water going over the bow)

Link to comment
Share on other sites

6 minutes ago, Alan de Enfield said:

 

It's to be hoped you never get caught up in a gate-protuberance when going up in a lock.

 

So many examples and near sinkings (if the crew hadn't been awake and seen the water going over the bow)

In general, yes.

 

And having the weak metal link I already mentioned I have and intend to keep attached to a soft rope shackle is going to be very nearly as safe as having it attached directly to the boat.

 

Now, any clues as to how the rope ones work please?

Link to comment
Share on other sites

1 hour ago, TheMenagerieAfloat said:

Mine are on with the things @MartinC mentions above - felt very proud of self for finding suitable option in very urban shopping centre!

 

Once boat is painted this summer I do see the point of the rope ones (for non-metal:metal, I'd keep my stretchable ones too)... Daft Q: (how) do you open them to get them through loop on boat/in chain @Ray T? They look rather smart.

The small loop slides open to allow the knotted end to go through.

  • Greenie 1
Link to comment
Share on other sites

1 hour ago, Ray T said:

This video shows how to make soft shackles but you get the idea of how they work.

 

 

 

Last time I bought some at Tradline Karen made them up whilst I waited so I got to see her making them.

Link to comment
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
 Share

  • Recently Browsing   0 members

    No registered users viewing this page.

×
×
  • Create New...

Important Information

We have placed cookies on your device to help make this website better. You can adjust your cookie settings, otherwise we'll assume you're okay to continue.