Morse control box

[Guest]

Would anyone know the connectors needed for joining the 33c teleflex cables to this Morse control box. It's an Mt2 I think.

 

throttle is the middle clip I think and gear shift outer, just unsure of clips to be purchased. Clevis I believe they are called.

 

thanks

Graham

[Troyboy]

They are called 'E' retaining clips that is  the name on the Spafax box that I have got. 

[Flyboy]

1 hour ago, Charles_Graham said:

Would anyone know the connectors needed for joining the 33c teleflex cables to this Morse control box. It's an Mt2 I think.

 

throttle is the middle clip I think and gear shift outer, just unsure of clips to be purchased. Clevis I believe they are called.

 

thanks

Graham

Asap will have what you need.    https://www.asap-supplies.com/brands/morse

[Guest]

what about these:

https://www.ebay.co.uk/itm/CLEVIS-33C-CLEVIS-FOR-BOAT-CONTROL-CABLES-ONE-FITS-33C-SERIES-MORSE-CABLES/302018529298?hash=item4651b50812:g:x6cAAOSw7NNUAFJ0

 

or these:

https://www.amazon.co.uk/gp/product/B0016ZJO1O/ref=ask_ql_qh_dp_hza

4 minutes ago, Flyboy said:

Asap will have what you need.    https://www.asap-supplies.com/brands/morse

ah yes, probe this one..

https://www.asap-supplies.com/morse-330-33c-control-cable-end-pivot-and-pin-6mm-thick

[Flyboy]

13 minutes ago, Charles_Graham said:

what about these:

https://www.ebay.co.uk/itm/CLEVIS-33C-CLEVIS-FOR-BOAT-CONTROL-CABLES-ONE-FITS-33C-SERIES-MORSE-CABLES/302018529298?hash=item4651b50812:g:x6cAAOSw7NNUAFJ0

 

or these:

https://www.amazon.co.uk/gp/product/B0016ZJO1O/ref=ask_ql_qh_dp_hza

ah yes, probe this one..

https://www.asap-supplies.com/morse-330-33c-control-cable-end-pivot-and-pin-6mm-thick

Trunion & pin are commonly used on the control end.      https://www.midlandchandlers.co.uk/engineering-tools/engine-controls/cable-fittings

[Guest]

Nice one. looks like the boy.

[Guest]

I take it the true union is squeezed between the plates, right?

 

the gap is about 10mm

hopefully the clips you suggested are this thickness.

 

thanks

[Tony Brooks]

The gear cable uses  the brass trunnion (stepped  barrel) as shown above. The   throttle needs an eye connector, a bit like a single sides version of the clevises shown above.

 

I THIN this is the one - https://www.asap-supplies.com/steering-and-controls/control-cables-and-fittings/control-cable-fittings/multiflex-33c-control-cable-terminal-eye-609271

Edited June 8, 2019 by Tony Brooks

[alan_fincher]

2 hours ago, Flyboy said:

Trunion & pin are commonly used on the control end.      https://www.midlandchandlers.co.uk/engineering-tools/engine-controls/cable-fittings

If there were a prize to be won for an eye-watering price for not very much at all, this would seem to be a serious contender!

https://www.midlandchandlers.co.uk/products/cable-clamp-kit-stop-203463-ec-263

[hider]

6 minutes ago, alan_fincher said:

If there were a prize to be won for an eye-watering price for not very much at all, this would seem to be a serious contender!

https://www.midlandchandlers.co.uk/products/cable-clamp-kit-stop-203463-ec-263

Ouch!!!!  Tried elsewhere? Limekiln? Aquafax? Calcutt?

[Guest]

hopefully this one on amazon will fit....