Replacement oil pressure gauge for jp3

[Capella247]

Hi folks, my oil pressure gauge needs a good tap to work and the lens is so scratched I can hardly see through it.   it’s been suggested I replace it.   I ve been searching online with out success.   Any one have suggestions for where I might source one.   Doesn’t have to be lister but does need to have a low enough range.  I’m looking to move it the engine room bulk head so I can see it better and ideally large enough to see the position of the needle roughly  from the back when steering.  Any pointers  welcome.    

Tom

[mark99]

How much do you want to spend?

 

Edited April 14, 2019 by mark99

[David Mack]

https://www.ebay.co.uk/itm/Low-Pressure-Gauge-for-Air-Gas-Oil-or-Water-50mm-0-30-PSI-0-2-Bar-1-8-BSPT-A/142459811881?hash=item212b443829:g:tc8AAOSwmtJXUviB

 

Or if you want more bling, something like this

https://www.ebay.co.uk/itm/Great-Vintage-Brass-Tomey-Pressure-Gauge/264080587148?hash=item3d7c6df98c:g:p3kAAOSwlfNcDR5~

or this

https://www.ebay.co.uk/itm/Vintage-Brass-Ships-Engine-Room-Pressure-Gauge-Nautical-Maritime-Marine-Boat/172883353537?hash=item2840a69fc1:g:2gIAAOSwEmxbxdHW

 

Plenty more on ebay.

[Capella247]

Great thanks for these suggestions ! . I must have been using the wrong search terms earlier as nothing like this came up.   I’ll have a browse.    Cheers.  Tom

[GRLMK38]

Try Paul Redshaw - http://www.vintagediesels.co.uk/