Johnemoto Posted February 19, 2019 Report Share Posted February 19, 2019 (edited) Hello all , my first boat and decided to totally gut and refit here's a few pics let me know what you think so far Edited February 19, 2019 by Johnemoto Add more pictures 1 1 Link to comment Share on other sites More sharing options...
Boater Sam Posted February 20, 2019 Report Share Posted February 20, 2019 Its a Springer! Are you having no wiring or gas or plumbing? Link to comment Share on other sites More sharing options...
Dr Bob Posted February 20, 2019 Report Share Posted February 20, 2019 6 hours ago, Boater Sam said: Are you having no wiring or gas or plumbing? First thing that came into my head. Also no stove? Link to comment Share on other sites More sharing options...
koukouvagia Posted February 20, 2019 Report Share Posted February 20, 2019 (edited) A couple of observations. It would be good at this stage to fit inspection panels for the bilges. Can't quite make out what the lining is above the gunwales and ceiling, but it looks a bit thin to me and therefore prone to bowing. eta I would also have left a bigger gap between the floor and the walls. Wood can expand a surprising amount and cause the boards to warp. Edited February 20, 2019 by koukouvagia Link to comment Share on other sites More sharing options...
LadyG Posted February 20, 2019 Report Share Posted February 20, 2019 Is it going to be ready for summer hols? Link to comment Share on other sites More sharing options...
WotEver Posted February 20, 2019 Report Share Posted February 20, 2019 4 hours ago, Dr Bob said: First thing that came into my head Mine too. Link to comment Share on other sites More sharing options...
dor Posted February 20, 2019 Report Share Posted February 20, 2019 The spray foam looks a bit thin, especially below the gunwale. What thickness is it? Link to comment Share on other sites More sharing options...
nbfiresprite Posted March 29, 2019 Report Share Posted March 29, 2019 On 20/02/2019 at 08:40, koukouvagia said: A couple of observations. It would be good at this stage to fit inspection panels for the bilges. Can't quite make out what the lining is above the gunwales and ceiling, but it looks a bit thin to me and therefore prone to bowing. It looks like White Faced Hardboard or MDF to me. Link to comment Share on other sites More sharing options...
Featured Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now