Search the Community
Showing results for tags 'wetroom'.
-
Hi all, I've just finished (kind of) the process of re-doing my bathroom. It's a tiny cupboard bathroom and annoyingly I didn't take a photo of the 'before' but I did take photos during the process. I thought it may give some handy tips to anyone that might be having issues with making the most of their tiny bathroom. The first step was ripping out the old floor, I couldn't believe the state of it when I took up the cheap lino flooring. The setup used to be: shower tray sunk in to the floor at the back and the toilet crammed in right by the door so the room was split in to two. The previous owner had literally nailed in chipboard on top of the original floorboards, cut out a square for the shower tray and screwed it in, then popped some lino over it. Foolproof! Only until I took up the lino and the chipboard was sopping wet and crumbled to the touch from years and years of being sodden and was very smelly. Yuck. Next up, mopping up all the leftover horrible water left underneath (And this is why I had water in my bilges regularly). The photo above is just before cleaning up and letting to air/dry out for 2-3 days. Now it's time for a new floor, Thick plywood was added with a countersunk hole for the shower drain. Luckily all the plumbing was fine so I extended the waste pipe and fitted a new drain. One problem I had is because the floor was now lower (more headroom for the shower) there was a 2-3 inch camp from the wall to the new floor. Back to the wood shop! I screwed in the plywood again around the edges to create something resembling a large shower tray. Time for painting, I know it's a sin to use wood walls in something like a wetroom but tiling the whole room wasn't an option. I bought some heavy duty waterproof paint which should hold up fine to a quick splash from the shower, as long as I give it a quick wipe with the towel when I'm done. This is the first coat but it dried nice, white, shiny and thick. It looked like enamel. To make this room as waterproof as possible, especially where standing water will be, so I purchased a wetroom kit. This included waterproofing sheets to lay down, PVA based paste to prep and waterproofing membrane to stick down the sheets and cover all over the place. Everywhere in grey has had a waterproof membrane. Tiling time! I purchased some large tiles from the DIY shop, this is them laid out before using the adhesive. I had limited ways of cutting as I only had a tile cutter, nothing that could cut circles or anything intricate so around the drain is an improvised solution. I finished off the tiling around the edges to complete the large 'shower tray' look which has since been grouted and sealed. And finally this is where it stands at the moment, it's not complete as we're fitting a pump out soon but it really makes use of all the space, or what little space there is. I'm really happy with it and hope it is of any help to any fellow boaters.
- 20 replies
-
- diy
- shower room
-
(and 3 more)
Tagged with:
-
Back on the wetroom subject. We hired a narrowboat last year, we were so impressed with her and we had a great week. We enjoyed it, and many previous canal holidays, so much that we have now bought a narrowboat that we are currently re-fitting in reverse layout. The boat that we hired last had a vinyl floor (with vinyl that curved up all walls ans was neatly welded at the mitred corners) wetroom which was fantastic, very clean, modern and functional. I would like to put one in our boat 'Garoline'. I am hoping that someone on here might have some photos or details of something that they have seen or have themselves and possibly details of a decent vinyl wetroom installer ? Many thanks Gary, Caroline & Garoline.