Jump to content

haza

Member
  • Posts

    1,015
  • Joined

  • Last visited

Everything posted by haza

  1. i have had my matting 4 years ,and yes the little pegs do drop off after time ,but as for wearing through the paint ,never had that trouble ,,maybe becuse i paint it every year ,the matting feels nice underfoot ..far better with then without ...horses for courses
  2. i ordered the pump of midland swindlers ..£95 ,,good price i thought
  3. my home is my boat ,,i should have started with .i am back at my moorings after 6 months on the canals....but maybe its me but ,but what was so hard to understand about my first thread ..,,,mind you i have been compered to chaulser for my grammer ...oh sorry ...ernie wise .this is one of the problems with dyslexia ..what i write seems fine to me ...but to others maybe not ...but i try not to let it hold me back ....
  4. been back home from 6 months cruising the canals ...sorry not all blessed with good grammer ,,seems there is only you that did not get what i ment
  5. they have had problems with these lock for years .i also now a survey is needed ..but the surveyors dont operate the locks day in day out ..my comment was a bit tongue in cheek ,,they have been closing them a couple of day here and there for years ...close them completely til they are done .lots of boaters dont go there for the lock reason i know 4 different boats that had to turn back this year ...we would all need looking at if we were that old
  6. yes bizz . i will here off grayham tomorrow maybe ..if not i will go ahead and order the one rusty put up ..thanks every one for your help x
  7. yer thanks every one thats the one from leisure shop direct ,i have left grayham cutmore a message ,may as well get service done while im at it ,,thanks again
  8. thank you going there now
  9. where would i locate that or what would i type in ebay thanks mrsmelly ....i knew you would all come though for me thanks x
  10. thanks bizzard its pretty weak to be honest and im with you the little motor on the top has had its day i think ,but i have tryed to locate one .but not having much joy ...
  11. thanks guys bore off alan
  12. yes just been on is site thanks ,,i think it the inpeler when i take it out the water tank it spins round ,when i put it back in the water it stops ...
  13. aldi gas central heating unit the 2928 model sorry ..should have said not aldi tin beans
  14. hi folks any of you guys out there got parts for for the aldi 2928 model what a time for it to break down .
  15. haza

    hi reg hope you are well do you still have the aldi 2928 spares for sale regards lorraine 

    1. reg

      reg

      Sorry gave them away same week, needed the space. Sorry about that.

      That time of year when i might regret it.

    2. haza

      haza

      yer i now what you mean ..do you know abt these things reg ,,the little motor that makes the impeler turn as gone i think as it wont go round to circulate the water 

    3. reg

      reg

      I think thats a common problem needs a new motor afraid not cheap.

      Some details here to check if its the right one

      http://www.alde.co.uk/itemdetails.php?itemId=14

      prices and spares here (Having a bet you say Ouch or similar)

      https://www.leisureshopdirect.com/gas/caravan-gas-water-heater/boilers-and-heaters/gas/water/boilers-and-heaters/alde-comfort-2928-boiler-and-spare-parts

      Or try Graham Cutmore, very good man

      http://www.grahamcutmoreengineering.co.uk/alde-slimline-boiler-2927/4513356699

      Does nationwide servicing and spares

      Just a thought might be worth asking on the forum some one may come up with a dodge to get things working again

  16. why a survey when we are told what the problem is by the keepers every time we go up there im sure those are the guys what would know ,,they work them nearly every day
  17. been back nearly a week ..i wont say im fed up but roll on april lets get out ...was out nearly 6 months ..and i got to say not a lot went wrong ...2 years back domestic alternator went .this outing starter alternator ...so over all ..i got to say all went pretty good ,,did anything go wrong with your cruise ..hope not tho
  18. Thanks for that cutthroat ,before this blacking the boat was last 2 packed fours years ago ,,,this time around the guy I had the boat off kindly came along to have a look at what state it was in ,,he said there was not a lot of change from 4 years ago and thought I could have waited another couple of years ,but I got piece of mind now ,so I will take your advice and look again in 4 maybe 5 years time regards
  19. Been in dry dock since Friday ..and I got to say we done a great job on the boat even if I say so myself ,it was the first time we have used hempadur 2pac gave it it 3 coats but was told 2coats would have done ,,but I had plenty over ,,i had heard so many story's the pros and cons , went round all the weld and tricky places with a paint brush ,,he followed me with a roller first coat done ,next day same procedure ,but the other way ..turned out pretty good well it did to look at any way .was told it won't need doing for about 7 years ,but to be honest I don't think anything would last that long so in two years time boat will come out ,,if good it will come out two years later ,,as I think four years maybe about right ,,,in less there is anyone out there who has used this covering and could give me more info , the boat before this we used bitumen ,if I had got to choose between the two ..it would be 2pac every time
  20. Been in dry dock since Friday ..and I got to say we done a great job on the boat even if I say so myself ,it was the first time we have used hempadur 2pac gave it it 3 coats but was told 2coats would have done ,,but I had plenty over ,,i had heard so many story's the pros and cons , went round all the weld and tricky places with a paint brush ,,he followed me with a roller first coat done ,next day same procedure ,but the other way ..turned out pretty good well it did to look at any way .was told it won't need doing for about 7 years ,but to be honest I don't think anything would last that long so in two years time boat will come out ,,if good it will come out two years later ,,as I think four years maybe about right ,,,in less there is anyone out there who has used this covering and could give me more info , the boat before this we used bitumen ,if I had got to choose between the two ..it would be 2pac every time
  21. There is something on Internet abt rust bullet , I will be painting my weed hatch with it tommorrow ,, I will let you now how it goes if you like ,could put photos up if I knew how ,,
  22. Hi check out rust bullet ,i used this on the engine room four years ago still looks like it was done yesterday ,,expensive ,but well worth it ,,well I think so
×
×
  • Create New...

Important Information

We have placed cookies on your device to help make this website better. You can adjust your cookie settings, otherwise we'll assume you're okay to continue.