coventrylad

Quick update, and a thank you to every one who offered help and support.A mate with an Interest in electrickery from school, no electric training what so ever, asked if he could look at the inverter, 2 hours later, he says i can fix this !!! there was indeed a variable resister that was adjusted in line with the hand held volt meter, and the pair calibrated. jobs a good un. works perfect.the boy is wasting his talents !!! Tim pm sent, cheers

it had this exact problem before i acquired it,my battery bank is 100% 27volts. but the led on the inverter says 32. it does need tweeking, but by who ? cheers for the input.

Hi folks, after some one, whose need was obviously greater than mine , And helped them self's to my pr combi last week, I have acquired the above inverter to get me out the brown stuff. Made by Rich electric, but baged as a invertek 2500 low frequency pure sine inverter. the problem is,as follows, the led on it says my battery bank is at 32 volts !! so the over voltage trip is kicking shutting it off, the battery bank is showing 27 volts, it had this problem prior to me getting it, any ideas, soon as the engine is started is also shows over voltage trip, check the alt output 27 volts, the bumpf says it can cope with 32 volts before tripping. what do i do please please, any recommendations for repairs derby shire please, it was supplied by stirling power, called them and emialed them no reply, i need help. cheers

They unbolted the inverter very neatly, and what a fool yes I know third party insurance only

My mooring is just on the cut , just before the lock keepers cottage and the auto mated lock, I can not begin to tell you how I feel

Last night my boat was broken in to in Sawley cut. Stirling 24 volt pure sine wave inverter , jcb chain saw, 32 inch TV stolen, I am complety gutted, waiting for the police to come now. I am heart broken

Sawley break in

Hi Justme, The VOC is 21.5 volts per panel.http://www.bimblesolar.com/solar/kyocera120w

Could any one with some knowledge of MPPT Controllers please recommend a controller that would show the amount of Amps that are being delivered to the battery bank please, My solar panels will be 120 watt, three of them wired in series, my battery bank comprises of 8 trojan T105s wired in series/parallel to give an out put of 24 volts, so at 24 volts the capacity of the combined battery bank will be 450 amps. thank you very much !

Hello friends, i am after some phone numbers contacts in the sawley ish area to come and measure up and make me some oak fitted cupboards in the saloon for storage, every one i try is too busy! but i am looking for a top class job, i.e no nails, cos i could do that ! Thank you very much, Michael

thank you all for your reply's, i just had sum concerns that the morco may not like a thermostatic mixer. thank you again.

Hi friends, work has started on the shower room, so the question is this please, am i best fitting a thermostatic shower mixer or the old style manual shower mixer with a morco gas boiler feeding the hot water ? thank you, Michael.

I spoke to mr Stirling in the week about this,This was his suggestion also and said it may work. i tried it with both jennys and still the same effect !!!

That is a cracking plan By ,eck. I am on a tow path mooring with no hook up,so are you suggesting sort of forget the shore power feed to the pro combi, and just use the genny to feed a stand alone batt charger connected to the main battery bank, any suggestions for a stand alone 24 v battery charger please, oh would these clever 4 stage batt chargers run on an old stlye genny ? thank you once again friend. Michael.