davidc

I was aware of that so I connected it to a brand new one which was fully charged, no change still a flashing ambers led on the first stage symbol Looking at the spec its only a 7 amp charger I wonder if that what has eventually done it in . spec Voltage AC 85-125 VAC, 50-60 Hz. Output power is reduced at lower input voltage. Current 2.0 A rms Back Current Drain* < 3 mA Charging Voltage Nominal: 12 V, 13.6 V, 14.4 V, 14.7 V or 16 V Ripple** Max 150 mV rms, max 0.3 A Charging Current 7 A max Ambient Temperature - 20°C till + 50°C. Automatic reduction of power at increased ambient temperature. Cooling Natural convection. Do not cover the charger. Charge cycle 5 step fully automatic IIUoIUp. Type of batteries All types of lead-acid batteries (Wet, Maintenance Free, VRLA, AGM and most GEL). Battery Capacity 14-150 Ah Dimensions 8 1/2 x 3 1/2 x 1 7/8 inches (L x W x H) Insulation Splashproof/Rainproof. Weight 1.7 lbs

My CTEX multi X5 7000, has stopped working will not recognise that the batteries it is connected to need charging. So I was wondering if there is any recommendations, I have a 3 leisure battery setup and would like to keep it as far as possible cheap and of course ideally the space it needs to fit is 6 inches by 9 inches

Have to say I bought Monty from great heywood and found bryan very . helpfull.